Push · Self-propelled · Riding · Lawn tractor · Zero-turn
Lawn Mower Repair Without Loading Up the Mower
A rider doesn't fit in most pickups, and a zero-turn needs a trailer. We bring the tools to your driveway, sharpen the blades on site, and leave it cutting clean.
Mower tune-up prices
Push mower
$125
+$15 for a 2nd blade.
- Oil change
- Spark plug(s)
- Air filter
- Oil filter (if equipped)
- Air up tires (where equipped)
- Grease zerks (where equipped)
- Fuel check (stale fuel drained, stabilizer advice)
- Cooling fins blown out
- Test run
- Blade sharpened + balanced
- Deck scraped/cleaned
- Drive belt visually checked (if equipped)
Note: Carburetor cleaning, electrical, battery, charging and output testing are repair work, billed as parts plus labor ($85/hr) with your OK first.
Self-propelled
$140
+$15 for a 2nd blade. Everything in the push list, plus:
- Drive belt visually checked
Note: Carburetor cleaning, electrical, battery, charging and output testing are repair work, billed as parts plus labor ($85/hr) with your OK first.
Riding mower / lawn tractor
$250
Up to 2 blades; +$15 for a 3rd.
- Oil change
- Spark plug(s)
- Air filter
- Oil filter (if equipped)
- Air up tires (where equipped)
- Grease zerks (where equipped)
- Fuel check (stale fuel drained, stabilizer advice)
- Cooling fins blown out
- Test run
- Blades sharpened + balanced
- Deck cleaned and leveled
- Drive and deck belts visually checked
- Nuts and bolts tightened
Note: Carburetor cleaning, electrical, battery, charging and output testing are repair work, billed as parts plus labor ($85/hr) with your OK first.
Zero-turn
$275
Up to 2 blades; +$15 for a 3rd. Everything in the rider list, plus:
- Pump and drive belts visually checked
Note: Carburetor cleaning, electrical, battery, charging and output testing are repair work, billed as parts plus labor ($85/hr) with your OK first.
Mower repairs we handle
- No-starts, hard starts and surging (carbs, fuel lines, fuel filters, plugs, coils)
- Rider won't move or creeps (belts, bypass lever, transaxle, hydro)
- Blades won't engage (PTO switch, clutch, deck belt, idler pulleys)
- Uneven or scalped cut (deck leveling, bent spindle, worn blade)
- Battery and charging problems, safety switch faults
- Smoking, oil leaks and overheated engines
- Flat tires and stuck height adjusters
$85/hr with a $170 visit minimum covering diagnosis and the first two hours, plus parts. Extra repairs found during a tune-up are hourly with no minimum, and we ask first.
Blade sharpening
Sharp, balanced blades cut cleaner, keep the grass tips from browning, and stop the vibration that wears out spindles. It's included with every mower tune-up. On its own it's $15 per blade, sharpened and balanced on site.
Before you book
Snap a photo of the model tag. On push mowers it's on the rear deck or behind the engine; on riders and zero-turns it's under the seat or on the frame near a rear wheel. EFI-equipped mowers (common on newer zero-turns) are off the list for now.
Mowers in Lovell, Cowley and Powell have no trip fee. Getting ready for the season? Read the spring tune-up guide.